Event Id 1054 Windows 2008 R2
See ME299563 for more details. After this, the login-script was applied properly. This is a Win7 x86 client on a domain with three 2008/2008R2 DCs. x 221 Anonymous In my case, I got this error only if a specific user logged in. have a peek at this web-site
The card doesn't support Zero Configuration and the NIC software doesn't load until after logon so it cannot connect to the DC until after the logon to the local workstation. Group Policy is working correctly if the last Group Policy event to appear in the System event log has one of the following event IDs: 1500 1501 1502 1503 ME324174 also No luck. This means the spanning tree cycle is never initiated.
Event Id 1054 Windows 2008 R2
Client is configured with three DNS servers. Updating the Realtek RTL8139/810x NIC drivers fixed the problem. x 97 Anonymous In my case, this problem occurred because a traditional ping between this server and the DC was stopped by the firewall.
- If you are experiencing a similar issue, please ask a related question Suggested Solutions Title # Comments Views Activity Where are the paths %systemroot% stored. 5 146 2015-08-25 password expiry Windows
- See ME827182 for a hotfix applicable to Microsoft Windows Server 2003.
- DCDiag is fine.
- All this laptop are brand new.
- They said all the problems were solved." x 2 Anonymous The Intel Pro 1000 MT series of NICs in confuction with Windows XP shows an Error code 1054.
- In the command prompt window, type gpupdate and then press ENTER.
- It appeared right after I changed a Domain.
- This causes the spurious ping times, and causes problem for GPO transfer rate calculations (hence Christophe Derdeyn's solution) You can read more about this issue in this blog by the Active
- This could be caused by a name resolution failure.
- Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System] "GroupPolicyMinTransferRate"=dword:00000000 This has reduced the frequency of the errors to a few times a day and the GPO seems to be updating correctly.
Get your mess fixed. An example of English, please! Then finally, the GPO was applied just as for the other PCs. Event Id 1054 Windows 2012 This information appears on the Details tab of the error message in Event Viewer.
Windows could not obtain the name of a domain controller. Event Id 1054 Group Policy Windows 2008 R2 I found a blog entry that said to install the "AMD Athlon™ 64 X2 Dual Core Processor Driver for Windows XP and Windows Server 2003". Long story short, we flashed the BIOS from A7 to A23 and it processed the GPOs immediately. English: Request a translation of the event description in plain English.
x 217 Anonymous I initially fixed this by using the solution proposed by Christophe Derdeyn, but I have since found a more complete solution that addresses the underlying fault. Event Id 1054 Group Policy Windows 2012 We found the following page: “AMD Opteron™ Processor Utilities and Updates”. Good to go now, thanks! 0 Featured Post Backup Your Microsoft Windows ServerÂ® Promoted by Acronis Backup all your Microsoft Windows Server â€“ on-premises, in remote locations, in private and hybrid The processing of Group Policy failed.
Event Id 1054 Group Policy Windows 2008 R2
We began to see this event every 5 minutes continuously whether a user was logged on or not. This scenario might work for some. Event Id 1054 Windows 2008 R2 GPResult shows GPOs being applied. Event Id 1054 Cannot Obtain The Domain Controller Name It can ping the DCs and all the machines on the network once I login into domain, everything seem fine, but just couldn't get the GPO deploy on this kind of
Group Policy Processing aborted. Check This Out This could be caused by a name resolution failure. As for the GPO, I did add two settings in the Registry (FOR LOCAL ADMINISTRATOR, the same user i did the Wireless setup for): [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System] "GroupPolicyMinTransferRate"=dword:00000000 Windows Registry Editor Version 5.00 x 2 Anonymous In our particular environment we had a 2003/XP computer separated from the 2003 DC over a VPN. Event Id 1054 Error Code 58
x 5 Lew Webb This error did not go away for me until I configured the settings in “Group policy->Computer Configuration->Administrative Templates->System->Net Logon->DC Locator DNS Records” on my DNS servers. DC cannot found Netlogon 5719... x 218 EventID.Net As per Microsoft: "A network connectivity or configuration problem exists. http://thedroidblog.com/event-id/event-id-2108-and-event-id-1084-windows-2008.html Join Now For immediate help use Live now!
Try shutting down ZoneAlarm (or any other personal firewall) and run gpupdate from a command line. Windows Could Not Obtain The Name Of A Domain Controller Server 2012 read more... Good to go now, thanks! 0 Featured Post Ransomware-A Revenue Bonanza for Service Providers Promoted by Acronis Ransomware â€“ malware that gets on your customersâ€™ computers, encrypts their data, and extorts
This error was among several.
I have the ip address of the dns server in AAA as primary> dns on HYPER, netbios over tcp/ip etc..>> Another thing is that I cannot use either domain controller or This could be caused by a name resolution failure. This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. Event 1055 We changed the MTU size for the VPN traffic to 1400 and the problem was fixed.
So any more idea for this problem? You didn't transfer the DNS role to the other DC and you didn't promote it to a GC (you already have a GC in AAA domain but none of the clients Computer Configuration was just not applied to this machine whilst other PCs (even identical Notebooks) had the same GPO applied without problems. http://thedroidblog.com/event-id/event-id-1567-windows-2008.html Watch this micro tutorial that describes how to configure prices for Magento super attributes.
A couple of other ideas as food for thought; - http://support.microsoft.com/default.aspx?scid=kb;en-us;840669#E6ADAAA - assuming there is more than one network adapter (wired and wireless) check the network adapter binding order in advanced x 221 Rob Lamb I found that my pc was connected to an older switch, and it wasn't receiving its group policies correctly. Join the community Back I agree Powerful tools you need, all for free. My workstations could not find a DC through DNS and my DNS was not dynamically updating its SRV records.
USERENV(20c.aa4) 14:20:57:257 PingComputer: No data available USERENV(20c.aa4) 14:20:57:257 ProcessGPOs: DSGetDCName failed with 59. The following error occurred: The semaphone timeout period has expireed...... \\This is not true, machine is getting IP from DHCP and i can run ipconfig /release /renew... \\Next system warning is Regards, Andy Marked as answer by Andy QiMicrosoft contingent staff, Moderator Monday, October 29, 2012 6:43 AM Sunday, October 21, 2012 1:18 PM Reply | Quote Moderator 0 Sign in to GPO is working fine for other desktops...in the same network, DC, DNS environment.
On the client computer, run ipconfig /flushdns and check again.
© Copyright 2017 thedroidblog.com. All rights reserved.